Unique, clean, safe and VERY friendly to the environment.
Eko-logs can be used for any application with any normal wooden logs, perfect for open fires, log burning stoves, multi-fuel burning stoves and fireplaces. The product is carbon neutral, 100% natural, 100% sustainable as a fuel source, produced entirely from waste material that can have no other use.
FEATURES & BENEFITS
They are cleaner and easier to use in practice, the ash makes a good fertiliser, they burn hotter, for longer, with less CO2 emissions than log materials. The Eko-logs contain less than 7% moisture and so are a much more efficient fuel than natural logs at between 25% and 40% moisture content depending upon seasoning. The use of Eko-logs should be the same principal as normal logs, the fire should be started with kindling and once lit the logs can either be broken to smaller pieces or placed on the fire whole as you would with logs. Approx burn time per kilo is 45 mins (of course depending upon core heat and size of fire), therefore the 6 pack will burn for approx 6.5 hours at full intensity.
The official certification bears testimony to Eko-log’s burning efficiency, showing that it derives more heat than normal firewood, yet at the same time emits a huge 20% less CO2. In addition, the actual burning process of Eko-Log, not only produces less smoke, lower general emissions and slightly lower CO2 levels, but interestingly the SO2 emissions are minimal compared to other fuels due to the lower sulphur content of the finished briquettes. After burning, there remains a natural, rice husk lignin waste. This residual ash constitutes approximately 12 to 16% mass, resulting in a value-added by product sold domestically within Vietnam as fertilizer.
CONCLUSION
In use, Eko-Log briquettes maintain high calorific burning values, excellent densities and hardness. They are available in optional sizes for various applications, and offer a natural replacement for logs or coal within any marketplace. Being a more cost-effective alternative to logs or indeed coal, they give off less smoke and ash with no environmental consequences or implications to bear, and yield a waste by-product with an associated value. Eko-Log in short, remains simply a more sustainable and consistent product for all markets, proving a truly environmentally-friendly confection which outperforms more environmentally-damaging, traditional firewood fuel sources.
STORAGE
Eko-logs should always be stored in a dry environment that is protected from the elements. At no point should any liquid come in contact to the Eko-logs before burning as moisture penetration will compromise the composition and burning qualities of the product.
SUITABILITY FOR USE
Eko-logs can be used for any application as you would with any normal wooden logs, perfect for Open Fires, Log Burning Stoves, Multi-Fuel Burning Stoves and Fire-Pits.
DIRECTIONS FOR USE
First start the fire with normal kindling material, we recommend either paper or fire lighters with the addition of sizeable kindling wood in stages to then allow the fire to be substantial enough and up to full temperature before adding any Eko-logs. It is recommended that each Eko-log should be broken into two or three smaller sections by either striking with an axe, hammer or simply dropping the logs on an edged split level surface to split. Please note that the logs will split evenly and much easier than
Any wooden logs so minimal striking pressure is needed. Once the fire is established and up to full temperature place one or two (depending upon fire size) of the split Eko-log sections onto the fire as you would with ordinary wooden logs and allow them burn away. Add more Eko-log sections as required to sustain the fire; no other fuel is needed to sustain the fire once the Eko-logs are up to temperature and burning.
Each Eko-log will burn at full temperature (fire heat and size dependant of course) for approximately one hour, however, continue to burn and give off heat for much longer. Please note - the fire temperature needs to be sustained to allow the introduction of new Eko-logs to allow them to ignite and burn as above. Any remaining ash from the logs after use can be spread on the garden as a natural fertiliser as the original product is 100% natural plant waste before burning.





Science & Tech

The product is 100% natural, without any additional natural or chemical ingredients at all and the logs are produced very simply using a combination of heat and extreme compaction pressure to form the logs.
· The logs are SGS tested (certificates available) to prove that they burn hotter (mainly due to the moisture content being only 6% vs the average log being 20-25%), cleaner from an emissions perspective and for longer at that sustained heat than normal logs

· As you will see from the technical attachments our eko-logs give off much less CO2 when burnt, and are actually classed as carbon neutral as the rice plants take in more CO2 when growing than they produce when burnt.

· The remaining ash is certified and tested to be a great soil fertilizer and aerator so in fact the environmental cycle is like no other product available, naturally grown and then naturally returned to the earth to benefit more plants growth and reiterate the carbon neutral status.


Eko-Log Technical information:
PRODUCT DETAILS:
With over 20 years experience in manufacturing in Asia, combined with strict control of ethical production and product development, our team now bring you the Eko-Logs product range. With pressures rising daily on government bodies throughout the world to reduce their own environmental impacts on the planet, we can all see that slowly the PowerStation’s across Europe are changing to Biomass friendly burning equipment and boilers. To make a real significant difference, we all share the responsibility and should be also looking at this within our own lifestyles and specifically in each of our own homes by using less coal and wood products that are unsustainable and damaging to the environment – the simple answer is using biomass alternatives such as Eko-Logs.

BENEFITS OF EKO-LOG ASH AS A FERTILISER
Test results have shown that potassium and phosphorous contents of paddy husk ash were 0.01 2.69% P2O5 and 0.1-2.54% K2O respectively and the pH was 08.1-11.0. The ash increases the soil pH, thereby increasing available phosphorous, it improves the aeration in the crop root zone and also increases the water holding capacity and level of exchangeable potassium and magnesium (AICOAF, 2001). Potassium is one of sixteen essential nutrients required for plant growth and reproduction and it is classified as a macronutrient, as are nitrogen and phosphorous (Marschner, 1995). Potassium is supplied by inorganic fertilisers such as muriate of potash or sulphate of potash or complex fertilisers, or by some organic sources.