Angus Max boiler
These cast iron boilers are simple to operate and are an extremely cost effective way of gaining central heating and hot water. They can be installed in to any open system and can burn all woods (including sawdust and chippings), coal, coke and peat. The boiler is available in 7 models—38kW, 48kW, 58kW, 68kW, 77kW, 86kW, and 95kW.
The Angus Max cast iron boiler is a cost efficient way of gaining central heating and hot water. Made from corrosion resistant cast iron it is simple, but effective.
The Angus Max boiler is easy to control and has a large combustion chamber with easy access allowing the user to burn wood, coal, coke, briquettes and a variety of other solid fuels.
It has high combustion performance, excellent corrosion resistance and comes equipped with its own ash pit and cleaning tools. It is simple to control the primary air flow with the thermo-mechanical regulator, the secondary air flow with the air rosette and you can control the chimney draught through the manual chimney flap. The thermo manometer indicates the temperature and pressure indicator.
Fuel loading is easy and when fully loaded it will last typically between 4 to 8 hours. It is possible to run over night on tick over by closing down the air supply through the regulation hatch, the air rosette and the manual chimney flap. The opening/closing handles are covered with a rubber burning resistant material.The inlet/outlet on the back of the boilers are 2" female threads. Malleable iron can be plumbed straight into the inlet/outlets or if you want to use copper tubing you will need to purchase a 2" Bush x either 1.1/2" (42mm OD copper tube) 1/1/4" (35mm OD copper tube) or 1" (28mm OD copper tube) along with a male iron coupling. In an open vented system the Angus Evo will be primary vented on the hot water flow and secondary vented from the DHW cylinder. It is recommended that a thermo safety valve is fitted. In a pressurized system consideration should be given for an appropriately sized expansion vessel on the central heating circuit before the return to the boiler and a safety group on the primary flow.
It is recommended that a heat exchanger with thermal safety valve is fitted. Please ensure you flush the system completely to avoid contamination on installation.
Expected running costs are less then half of that of gas or oil.